Software Download
Before starting the procedure please power off your
Humax product using the rear ON/OFF switch (if available)
or disconnecting from the mains.
NB To download software via a
PC you do not need to have your product connected to
a TV or the aerial. You will only need a power connection.
Connect a Null Modem/Serial cable (9 Pin Female to 9
Pin Female) between the COM port of your PC and the
RS232 connection on your receiver.
NB The cable required must be female
to female with no adapters
1. Download the WDN4OAK+
tool or the Formula
for NEO
tool
2. Extract the ZIP file to a directory on your PC.
3. Double click on the Setup.exe file and follow the
on screen instruction to install the tool.
4. Now click on START > PROGRAMS > WDN4OAK+ >
WDN4OAK Or START > PROGRAMS
> Formula for NEO > Run Formula
for Neo
5. DOWNLOAD
the PVR-9200T software here (PGXTF
1.00.21)
Download Instructions
* WDN4OAK+
* Formula for NEO
When
the message appears on your PC power on the Humax product
from the rear ON/OFF switch or from the mains.
The download process will now start and you will see
the progress bar on the PC to STB window.
ON the receiver you will see D00, D10, D20, etc; when
programming the software the display will change to
P10, P20, P30
Please do not switch off the receiver until you see
END on the front display. Your receiver is now upgraded.
Now power off from the rear, reconnect to your TV and
aerial (if applicable) and power on the PVR.
When the message appears on your
PC power on the Humax product from the rear ON/OFF switch
or from the mains.
The
download process will now start and you will see the
progress bar on the PC to STB window.
ON the receiver you will see D00, D10, D20, etc; when
programming the software the display will change to
P10, P20, P30
Please do not switch off the receiver until you see
END on the front display. Your receiver is now upgraded.
Now power off from the rear, reconnect to your TV and
aerial (if applicable) and power on the PVR.
Download FAQ
Q. I am unable to install the
download tool
A. The download tools are ZIP files. To install the
program please extract the files using WinZip, Winrar,
or Compress (Zip) tool.
Q. WDN4OAK+ does not install
on my PC
A. Users with Windows XO may have problems installing
the WDN4OAK+ tool, in this case please use Formula for
NEO
Q. Where can I find the cable
used to connect the equipment?
A. You can get this cable from PC or some electrical
shops, but please make sure that the cable is correct.
Alternatively you can buy it online:
http://www.ebuyer.com/customer/products/index.html?action
=c2hvd19wcm9kdWN0X292ZXJ2aWV3&product_uid=28326
Or
http://www.maplin.co.uk/Module.aspx?ModuleNo=13509&TabID=1&source=15&WorldID=&doy=17m1
Q. The download does not start
A. Please make sure that the cable is connected correct
between your PC and receiver
Check that you are using the correct cable
Check that you are selecting the correct COM Port on
the download tool
Close any programs that you have running in your Taskbar
Restart your PC and retry the download
Q. I receive the E-UT error on
my receiver's display
A. This is caused when there is an error in the transfer.
Restart your PC, reconnect the cable, and try the download
again.
Q. I receive the E-ID error
A. You may be trying to download the wrong software.
Please check the HDF file is the correct version for
your model. Alternatively email
us with your receiver's STATUS details
Q. I do not have a COM Port,
how can I download the software?
A. It is possible to use a USB to serial adapter to
download the software, for further details please email
us.
Q. I do not have a Windows PC,
how can I download the software?
A. We do not have any tools at the current time to download
the software with operating systems other than Windows.
Q. I do not have a PC, how can
I download the software?
A. We do intend to release as many updates as possible
via OAD. We will place information on our UK website
www.humaxdigital.co.uk
whenever the next release date is available.
|
